Cal.D710 Setting Instruction : Skin diving log Mode

Mode Change Flow

Using the Skin diving log Mode

The skin log mode is used to display the skin diving log automatically recorded by the watch during skin diving. A maximum of 100 sets of log data can be recorded for skin diving (provided that the dive time of a single dive is within 2 hours and no more than 15 dives per day). The contents of log data for a single dive are displayed using three displays for both the scuba log and skin log modes.

Calling Up Skin Diving Log Data

(1)	The most recent skin diving log data is displayed when the watch is switched to the skin diving log mode by pressing the lower left button (D).
(2)	The log data that you want to view can be selected by pressing either the lower right button (A) or upper right button (B). Logs are identified according to the date and dive number. * Old log data is called up each time the lower right button (A) is pressed once, while new log data is called up each time the upper right button (B) is pressed once. (Pressing either button continuously causes the log data to change rapidly.)
(3)	The display of the selected log data changes each time the upper left button (C) is pressed once.

*	"NO LOG" is displayed when there is no skin diving log data recorded.
*	Maximum depth is displayed as "--.- m" when the maximum depth has exceeded 80.0 m (266 ft) while diving.
*	"--.- deg. C" is displayed for minimum water temperature in the case of log data for which the dive time is less than 1 minute.
*	Calling up log data may take some time when there is a large amount of log data recorded. In such cases, "WAIT" is displayed while log data is being called up. The water sensor and none of the button operations function while "WAIT" is displayed.

Deleting Log Data

Individual sets of log data cannot be deleted. When a new dive is made when there are already 100 sets of dive data recorded for the total dive data of scuba diving log data and skin diving log data, the oldest log data is automatically deleted.

It is strongly recommended to promptly record important log data in another storage medium. When a new dive is made and there are already 100 sets of dive data recorded for the total dive data of scuba diving log data and skin diving log data, the oldest log data is automatically deleted. In addition, since there is also the possibility of data being lost due to a malfunction in the watch or during repairs or inspections, it is recommended to promptly transfer data to a personal computer following completion of diving. Please note that the manufacturer cannot be responsible for data that is lost due to a malfunction.

To Page-Top