All Reset
The time, date and all other watch settings are returned to their initial (default) settings when the all reset procedure is performed. Perform this all reset procedure in the following cases.
* There is an error in the watch display.
* When charging the watch after it has stopped completely as a result of being insufficiently charged.
Even if the all reset procedure is performed, location settings (displayed locations, names of locations), diving logs, daily graphics and anniversary graphics that have been set by the user in the PC remain without being deleted. However, it should be noted that only diving data acquired prior to performing the all reset procedure on the day the all reset procedure is performed may be deleted.

Procedure
1. Simultaneously press and then simultaneously release the lower right button (A), upper right button (B), upper left button (C) and lower left button (D).
. All of the display elements on the watch are displayed after an alarm sounds and "INITIALIZE" is displayed.
2. Press any of the buttons once while all the display elements are displayed.
. The watch displays the time mode of the standard mode after "LOADING" is displayed.
This completes the all reset procedure. Correctly reset the time and date as well as other modes after performing the all reset procedure.
* When the All-Reset procedure is performed, <Current Log Counter in watch (Total number of Dives)> is reset to zero. If you want to continue counting from the previous log number, re-enter the previous log number for <Your Current Log Number> with the CAPgm software provided.
* Although an alarm sounds every second while all of the display elements of the watch are displayed, this is not a malfunction.
* If all of the display elements are not displayed after performing step (1) of the procedure (such as when the alarm continues to sound without the display changing), repeat step (1) of the procedure.
* The watch automatically returns to the time mode of the standard mode if none of the buttons arepressed for about 2 minutes while all of the display elements are displayed after performing step (1) of the procedure. The all reset procedure is completed in this case as well.


Copyright 2003 CITIZEN WATCH CO.,LTD. ALL Rights Reserved.