Mode Change Flow
Using the Standard Mode : Using the Travel Time Mode

The travel time mode is used to display the date and time of another location separate from the Main Time of the time mode (Main time). Simply select a location desired to be displayed in the travel time mode from the pre-registered locations to automatically display the time and date for that location as determined by converting the time difference. In addition, the location displayed in the travel time mode and the location displayed in the time mode can be easily interchanged.

A. Switching the Display
The time difference from the Coordinated Universal Time (UTC) along with the time difference from the time in the time mode are displayed for as long as the upper right button (B) is pressed in the travel time mode.


B. Setting the Travel Time
1. The location flashes when the upper left button (C) is pressed for at least 2 seconds and then released in the travel time mode.

2. The location is changed by pressing the upper right button (B) or lower right button (A).
* Pressing the upper right button (B) once calls up the next location each time it is pressed, while pressing the lower right button (A) once calls up the next location in the reverse order each time it is pressed. (Pressing either button continuously enables the location to be changed rapidly.)
* Refer to the section on "Locations Displayed by this Watch" for information on displayed locations.
3. The setting for daylight savings time (ON (set) or OFF (canceled)) flashes when the upper left button (C) is pressed once.
4. Daylight savings time is corrected by pressing the upper right button (B) or lower right button (A). The display switches back and forth between the settings each time the lower right button (A) or upper right button (B) is pressed once.
5. Pressing the lower left button (D) and then releasing returns the watch to the normal display.
* The 12 hour or 24 hour format is used in accordance with the setting in the time mode.
* Daylight savings time cannot be set for Coordinated Universal Time (UTC).
* In the case the setting for daylight savings time is changed when the location in the travel time mode is the same as the location in the time mode, the setting for daylight savings time is applied to the time mode as well.
* The watch automatically returns to the normal display of the travel time mode when none of the buttons are pressed for about 3 minutes in the correction state (display flashing).
* The watch can be immediately returned to the normal display of the travel location mode by pressing the lower left button (D) and then releasing in the correction state (display flashing).
* The watch automatically returns to the time mode when none of the buttons are pressed for about 3 minutes in the travel time mode.

C. Interchanging Locations Between Travel Time Mode andTime Mode
When a location in a time zone that is frequently used is set in the travel time mode, and this interchanging procedure is performed after having arrived at that location, the time and date of the location displayed in the travel time mode can be displayed in the time mode. As a result, the time and date of the location that had been displayed in the time mode is now displayed in the travel time mode.
1.  Press the upper right button (B) and upper left button (C) simultaneously for at least 2 seconds and then release in the travel time mode. The location in the time mode and location in the travel time mode are interchanged and the watch switches to the time mode.
Example: Location set in time mode (main time):
 TOKYO Location set in travel time mode: LONDON


To Page-Top

Copyright 2003 CITIZEN WATCH CO.,LTD. ALL Rights Reserved.